datasheet-option-r4-for-d-relays-v1-1(3).pdf
D-relay with fast switching contacts: maximum pull-in time 7 ms for all four change-over contacts. For DC coil voltages only. To avoid unwanted tripping, no normally open contact will make below 60% of the nominal voltage. Input voltage must be a rising edge with – minimum slew rate: 1 V/ms – minimum time: 10 ms Polarization and back EMF protection diode (option D and P) are integrated. No LED available. The mechanical life will be 1 million operations. All other specifications as mentioned in the datasheet of the D-relay.
The V32 is a D-Relay Socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay.
