d8fr8-v02-1.pdf
D-relay with fast switching contacts: maximum pull-in time 8 ms for all eight change-over contacts. For DC coil voltages only. To avoid unwanted tripping, no normally open contact will make below 60% of the nominal voltage. Input voltage must be a rising edge with – minimum slew rate: 1 V/ms – minimum time: 10 ms 02
Suitable for energy controlling systems or any critical
application where the reduction of total switching time
is important.
• Tripping functions and applications where the request
is high breaking capacity with fast actuation.
• Contact multiplication in command and controlling
applications with minimum delay.
• Application with low duty loads control
• Can find usage in substations, power plants and
industry
• Alarm signalling
The V32 is a D-Relay Socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay.
