Sockets & Accessories for Power Relays

To replace P8 relay in existing socket

The 2D-BZ adapter has been designed to replace the widely installed P8 relays without having to change your installation. The adapter is designed to be plugged in the existing sockets. The adapter is equipped with two coupled D-relays.

socket - Soldering terminals, panel, 8 pole

The V96 is a panel / flush mount relay socket for soldering wires onto solder tags. The V96 socket has one terminal per relay contact. The V96 relay socket has no internal connections which makes it highly reliable. To prevent fault relay placement t...

D-Relay Socket

The V26 is a panel mount D-Relay Socket with one terminal per relay contact. The wires are crimped on separate crimp contacts A260 for insertion after crimping. To prevent fault relay placement the socket can be equipped with mechanical keying to acc...

D-Relay Socket

The V22BR is a surface / wall mount D-Relay Socket with extra space for ring tabs. The V22BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket ...

D-Relay Socket

The V23BR is a 35 mm rail mount D-Relay Socket with extra space for ring tabs. The V23BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket and ...

D-Relay Socket

The V31 is a panel mount D-Relay Socket. The V31 socket has two faston connections per relay contact, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. To prevent fault relay placement the socket can...

D-Relay Socket

The V32 is a D-Relay Socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay.

D-Relay Socket

The V23 is a surface / wall and 35 mm rail mount D-Relay Socket. The V23 socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 , so looping/daisy chaining can be done on the socket and no external connector or terminal ...

D-Relay Socket

The V29 is a surface/wall and 35 mm rail mount D-relay socket. It has two highly reliable spring clamp terminals per relay contact, allowing looping/daisy chaining on the socket without an external connector or terminal. The spring clamp terminal mak...

CU-Relay Socket

The V18 is a CU-Relay Socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay. Equipped wi...

D-Relay Socket

The V33 is a panel/flush mount D-Relay Socket with a base featuring two highly reliable push-in terminals per relay contact, allowing looping/daisy chaining on the socket without an external connector or terminal. Solid and stranded wires with ferrul...

CU-Relay Socket

The V17 is a surface / wall and 35 mm rail mount CU-Relay Socket. The V17 socket has two spring terminals per relay contact suitable for two stripped wires up to 2.5 mm2, so looping/daisy chaining can be done on the socket and no external connector o...

CU-Relay Socket

The V16 is a surface / wall and 35 mm rail mount CU-Relay Socket. The V16 socket is suitable for two stripped wires up to 3.3 mm2, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed.  Equipped wit...

Socket

The V88 is a panel/flush mount relay socket with a base featuring two highly reliable push-in terminals per relay contact, so looping/daisy chaining can be done on the socket without an external connector or terminal. Solid and stranded wires with fe...

Socket

The V89 is a panel mount relay socket. The V89 socket has two faston connections per relay contact, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. To prevent fault relay placement the socket can b...

socket - Screw terminal, 8 pole

The V92BR is a surface / wall mount relay socket with extra space for ring tabs. The V92BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket an...

D-Relay Socket

The V93 is a surface / wall and 35 mm rail mount D-relay socket. The V93 socket has one screw terminal per relay contact suitable for two wires upto 2.5 mm2 , so looping/daisy chaining can be done on the socket and no external connector or terminal i...

D-Relay Socket

The V93BR is a 35 mm rail mount D-relay socket with extra space for ring tabs. The V23BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket and ...

Socket

The V99 is a surface/wall and 35 mm rail mount relay socket with two spring terminals per relay contact, so looping/daisy chaining can be done on the socket without an external connector or terminal. Quick connection is made by pressing the spring wi...

D-Relay Socket

The V3 is a panel / flush mount D-relay socket for soldering wires onto solder tags. The V3 socket has one terminal per relay contact. The V3 relay socket has no internal connections which makes it highly reliable. To prevent fault relay placement th...

Socket

The V97 is a panel mount relay socket with one terminal per relay contact. The wires are crimped on separate crimp contacts A260 for insertion after crimping. To prevent fault relay placement the socket can be equipped with mechanical keying to accep...

To replace P16 relay in existing socket

The 4D-BZ adapter has been designed to replace the widely installed P16 relays without having to change your installation. The adapter is designed to be plugged in the existing sockets. The adapter is equipped with four coupled D-relays.

A031 Protection cover for increased protection